Installation Of The Sim Card And Memory Card; Buttons - mPTech Hammer Energy 18x9 Mode D'emploi

© 2018 mPTech. All rights reserved.

7. Installation of the SIM card and memory card

The device is a cellular phone made in hybrid Dual SIM technology (up to 2
SIM cards handling and 1 microSD) allowing the use of two mobile networks
or one SIM card and microSD card at the same time.
To insert the SIM card (s) correctly, turn off the device, open the device, open
the waterproof seal (9) with your fingernail. Slide out the tray and then
precisely place the SIM card(s) on it as shown in the notches and picture
(16). Then carefully and gently insert the tray into place and close the gasket
securely.
To insert the memory card correctly, turn off the device, open the waterproof
seal (9) with your fingernail, slide out the tray, and then precisely place the
microSD card (instead of one of the SIM cards) on it as shown in the notch
and picture (16). Then carefully and gently insert the tray into place and
close the gasket securely.

8. Buttons

Menu
• Pressing it will cause the list of open apps to appear, where you
can switch in-between or turn them off.
• A double quick press switches to the previous application.
Home
• One quick press takes you to phone desktop.
• Pressing and holding activates Google Now.
Back
• Pressing <Back> will cause exit from the application / return to the
previous screen.
Blockade on/off button
• One quick press locks/unlocks the screen.
• Pressing the button for about 2 sec. will cause:
o if the smart phone is off - the device would switch on,
o if your smartphone is on, activates a menu to shut down the
device or reboot the system.
Volume increase and decrease buttons
• Pressing during a voice call will cause an increase or decrease of
the audio connection volume.
Programmable button
• Pressing and holding starts the programmed application - the
camera application is assigned to it as default.
HAMMER Energy 18x9 - EN
26