Husqvarna LE121P Manuel D'utilisation page 11

To assemble the grass catcher
1. Attach the grass catcher frame to the grass bag with
the rigid part of the bag on the bottom. Keep the
handle of the frame on top of the grass bag.
2. Attach the grass bag to the grass catcher frame with
the clips.
3. Lift the rear cover and attach the grass catcher to the
rod of the rear cover.
To assemble the mulch plug
1. Lift up the rear cover and remove the grass catcher.
2. Remove the side dischage chute (if installed) and
close the side dischage cover.
428 - 002 -
3. Put the mulch plug into the discharge channel.
4. Replace the blade (A) with the mulch blade (B).
A
To assemble the discharge chute
1. Remove the grass catcher.
2. Install the mulch plug and close the rear cover.
3. Lift the discharge chute cover and install the
discharge chute.
4. Make sure that the discharge chute cover rests on
the discharge chute.
B
11