Bialetti FRL01 Instructions D'emploi page 30

EN
Problem found
The appliance does not
turn on.
The appliance does not
chop properly.
The appliance vibrates
and generates noise.
8. Problems/causes/solutions
Plug not inserted.
The voltage required
for the appliance
does not correspond
to the available mains
voltage.
Possible internal dam-
age.
Use of too hard food.
The graduated con-
tainer was fi lled with
too much food.
Possible faulty blades.
The appliance is not
placed on a stable
surface.
Possible cause
30
Solution
Check proper inser-
tion of the plug or in-
sert it into a diff erent
power socket.
Check the mains volt-
age with the values
required for the appli-
ance.
Contact the Customer
service Bialetti.
Follow the instructions
in this
manual.
Do not exceed the
amount indicated in
this manual.
Contact the Customer
service Bialetti.
Position the appliance
on a stable surface.
Put it on a rubber mat
to reduce vibrations
and noise.