Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Audio language selection
[LANGUAGE q Audio Language]
Audio Language
Subtitle Language
Subtitle Display
OSD Language
Move
Return
This provides an alternative to the AUDIO button for selecting
alternative soundtracks. The default setting is English* but
you can also select Japanese, or a number of other different
languages as the audio track to be played from a multi-lingual
disc.
To select a language other than English or Japanese, move
the cursor to "Other" and press ENTER.
Audio Language
Subtitle Language
Subtitle Display
OSD Language
List of Language
Code (0 ~ 9)
Move
Return
If you select the List of Language field, you see a list of ten
relatively common languages. Select from this list by moving
the cursor and pressing ENTER.
If the language you want is not listed here, but is listed on
page 35, move the cursor to the Code (0 - 9) field (all
numbers are reset as dashes) and use the number buttons to
enter the four-digit code for that language. Press ENTER
when done.
< If the selected language is not available on the disc, the first
language of the disc is played.
Subtitle language selection
[LANGUAGE q Subtitle Language]
Audio Language
Subtitle Language
Subtitle Display
OSD Language
Move
Return
This provides an alternative to the SUBTITLE button for
selecting alternative subtitle languages. The default setting is
English* but you can also select Japanese, or a number of
other different languages for the subtitles to be displayed.
34
Settings (Language)
English *
Japanese
Other
Select
Exit
English *
Japanese
Other
en : English
0 5 1 4
Select
Exit
English *
Japanese
Other
Select
Exit
To select a language other than English or Japanese, move
the cursor to Other and press ENTER.
If you select the List of Language field, you see a list of ten
relatively common languages. Select from this list by moving
the cursor and pressing ENTER.
If the language you want is not listed here, but is listed on
page 35, move the cursor to the Code (0 - 9) field (all
numbers are reset as dashes) and use the number buttons to
enter the four-digit code for that language. Press ENTER
when done.
< If the selected language is not available on the disc, the first
subtitle language of the disc is used.
Displaying subtitles
[LANGUAGE q Subtitle Display]
Audio Language
Subtitle Language
Subtitle Display
OSD Language
Move
Return
This turns subtitling ON* or OFF.
Note that the captions on some disks cannot be turned off.
On-screen display language
[LANGUAGE q OSD Language]
Audio Language
Subtitle Language
Subtitle Display
OSD Language
Move
Return
There are two choices here: English* and Japanese.
NOTE: If the unit is set to Japanese and you find it impossible
to read the menu settings, etc., you can restore all the factory
default settings, and the menus will appear in English again
(all other settings will be wiped out. Alternatively, press
SETUP, navigate to the third tab (
" and select the first option "
ON *
OFF
Select
Exit
English *
Japanese
Select
Exit
), move down to "OSD
(English)".
Publicité
Chapitres
Table des Matières
Dépannage
