Connection To A Tv - Esoteric UX-1 Manuel Du Propriétaire

CAUTION:
< Switch off the power to all equipment before making connections.
< Read the instructions of each component you intend to use with this unit.
< Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the
signal interconnection cables together with the AC power cord or speaker cables.
If you are not using an
audio amplifier, connect
the L and R analog audio
outputs to the appropriate
audio inputs of the
television.
10

Connection to a TV

C
R L Y P
AUDIO IN COMPONENT
VIDEO IN
TV (Monitor)
B
D E A
P
B R
VIDEO
IN
S-VIDEO DVI-D IN
IN (HDCP)
Only use one method of video connection
(note that the BNC component method
uses three cables).