Cleaning - Honeywell VNT5150H1000 Guide D'installation

Cleaning Steps
1. Disconnect the AC power from the unit or the
wall.
3. Clean inside of unit with a damp cloth and wipe
dry when finished.
28
2. Open the side door panel by opening the two
latches on the top of the side panel and lowering
the panel to its fully open position Remove both
filters from the top left and right sides of the
Core, then vacuum both filters.
Slide out the Core, and clean according to the
instructions on the previous page.
4. Replace the Core and the two filters, re-latch the
side panel, then reconnect the AC power to the
unit.
ERV/HRV Ventilation Systems 69-2480EF—01