Cleaning - Honeywell TrueDRY DR65 Guide D'installation

Cleaning

On an annual basis, maintenance is required to ensure TrueDRY runs at peak efficiency.
Unplug TrueDRY DR65 before beginning
1
service. Press down on the quick-release
button and lift the duct collar.
Remove filter (50049537-005) and replace
3 with new filter.
TrueDRY™ DR65 Dehumidification System 69-2089EFS—14
Remove duct collar to access filter.
2
Check the drain connection and drain
4 line to ensure it is clear of debris and
sludge. Ensure all hose connections are
secure once maintenance of the drain
lines is complete.
When service is complete, initiate a call
5
for dehumidification and check that the
compressor and fan activate. If using
the VisionPRO IAQ or TrueIAQ controls,
reset maintenance reminders.
11