Glatz Ambiente Instructions De Montage page 5

Bodenhülse drehbar
Ground socket Ambiente turnable
Douille de sol Ambiente pivotante
Piantone da interrare girevole Ambiente
GROUND SOCKET AMBIENTE TURNABLE
Safety regulations
Any disregard of safety regulations and the instructions for erection
and operation can result in serious damage to people and material
for which the manufacturer expressly refuses to accept any liability
or obligation under warranty!
 Fitting is to be carried out by specialists in the craft of bricklaying or by persons
trained appropriately by Glatz.
 The flange ring of the ground socket must be fitted in a perfect vertical position.
 The foundation dimensions as per the following list are to be strictly observed.
 Water which accumulates in the ground socket must be able to escape into the
ground.
 Local regulations and frost depths are to be taken into account.
 Safety distance from fixed obstacles or neighbouring shades at least 20 cm.
Fitting instructions
10.2005-DEFI
Scope of supply
 Ground socket set, steel hot
galvanized, already assembled
 2 screw bolts M10 x 100
 4 washers
 2 nuts M10
 Winter cover aluminium checker
plate with 2 screws M10
 Protection cover for rotating
mechanism
Notch in the ground socket flange
marks the centre axis of the swivel
steps.
Client's performances
 Fitting on the site
 Drainage of water
 Electricity supply (cables and pipes)
from the bottom into the ground
socket
 Setting up the shade
English
5