Setting A Programme - Electrolux EWP 1072 TDW Notice D'utilisation

12 www.electrolux.com
Liquid or powder detergent
1.
3.
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
– Do not use gelatinous or thick liquid detergents.
– Do not put more liquid then the maximum level.
– Do not set the prewash phase.
– Do not set the delay start.

9.3 Setting a programme

1. Turn the programme knob and set
the programme:
– The indicator of the
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes
on.
If you set something incorrect, the
indicator
A
B
flashes.
flashes red.
2.
4.
9.4 Starting a programme
without the delay start
Press the :
• The indicator of the
and stays on.
• The programme starts, the door locks,
the indicator
• The drain pump can operate for a short
time when the appliance fills water.
stops to flash
is on