Setting A Programme; Starting A Programme Without The Fin Différée Option; Starting A Programme With The Fin Différée Option - Electrolux EWF 1406RC Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

14
www.electrolux.com
3.
B
Position A for powder detergent (factory setting).
Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the delay start (or Finish in option).
10.5 Activating the appliance
Press and hold for a couple of seconds
the Marche/Arrêt button to activate or
deactivate the appliance.
A tune sounds when the appliance is
activated.
The display shows the word On.

10.6 Setting a programme

1. Touch the programme button
set the programme:
• The indicator of the button
flashes.
• The display shows the
programme duration.
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an
option, the indicator of the set option
comes on.
If you set something
incorrect, the display shows
the message
10.7 Starting a programme
without the Fin différée option
Touch the button
and
.
.
4.
• The indicator of the button
stops to flash and stays on.
• The programme starts, the door
locks, the indicator
• The drain pump can operate for a
short time at the beginning of the
washing cycle.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
• The display shows the
new value.
10.8 Starting a programme with
the Fin différée option
1. Touch the button
to choose the number of hours in
which you want the washing cycle to
be finished.
The display shows the number of hours
you set (e.g.
) and the indicator above
the button
is on to show that his
option is active.
is on.
again and again

Publicité

Chapitres

Table des Matières
loading

Table des Matières