Qlima ECO 1700 Manuel D'installation page 62

• Check the electric power supply. This de-
• The plug must be easily accessible once the
• Do not place the appliance directly under
Before connecting the device, make sure that:
• The required voltage is complied with.
• The socket and current meet requirements.
• The plug fits the socket.
G
• Never cover the air inlet.
• Do not insert any objects into the holes in-
• Avoid all contact with water. Do not spray
• Remember to unplug the stove before
• Always disconnect the plug from the sock-
• Disconnect the plug from the socket when
4
62
call an electrician to request installation.
vice must only be connected to an earthed
socket - voltage 230 V / ~ 50 Hz.
The device MUST always be connected
to a grounded socket. It is forbidden
to connect the device to an unearthed
socket.
device has been connected.
a wall mounted socket.
The electrical connections have been
adequately checked by an expert,
especially if you are not sure everything
is in order.
side the stove.
the stove or immerse it in water, as this
could cause a short circuit.
cleaning or replacing parts on it.
et before carrying out any maintenance
work on the stove.
the heater is not in use.