4. When the washer/dryer is level, use a ⁹⁄₁₆" open-end wrench
to securely tighten all four locknuts against the pedestal. The
locknuts must be tightened to prevent vibration.
locknut
5. Align front panel with pedestal and snap in place.
For washer/dryer models that are 38" (96.5 cm) high, the wide
edge should be placed on top.
For washer/dryer models that are 36" (91.4 cm) high, the wide
edge should be placed on bottom.
wide
38" (96.5 cm)
models
narrow
36" (91.4 cm)
models
5