HumanTechnik mona Mode D'emploi page 24

Video receiver: Setting the volume
The call volume can be adjusted in 9 levels.
- During a video transmission, press the Navigation keys "" and ""
to adjust the volume.
- If the receiver is in stand-by mode, press any key to switch the display
on. Press the menu key
navigation keys, select "Volume", then press "Select"
The volume can be adjusted by pressing "" and "" .
Press "Back"
Video receiver: Adjusting display brightness
The display brightness can be adjusted in 9 levels.
- During a video transmission, press the Navigation keys "" and ""
to adjust the brightness.
- If the receiver is in stand-by mode, press any key to switch the display
on. Press the menu key
navigation keys, select "Brightness", then press "Select"
The brightness can be adjusted by pressing "" and "" .
Press "Back"
Video receiver: Toggle key tone
1. Press any key to switch the display on. Press the menu key
enter the main menu. With the navigation keys, select "Key tone".
Press the left key
2. Use "" and "" to enable or disable the key tone.
3. Press "Save"
Video receiver: Automatic snapshot settings
The unique snapshot function automatically records photographs
when a sound activates the baby monitor. To activate the Auto Snap
function, set the receiver up as follows:
1. Press any key to switch the display on. Press the menu key
enter the main menu. With the navigation keys, select „Auto Snap
set.". Press the right key
2. Use „" and „" keys to choose between 1 to 3 photos and
„Off" to enable or disable the function.
3. Press „Save"
English 24
to enter the main menu. With the
to save the setting and return to the previous menu.
to enter the main menu. With the
to save the setting and return to the previous menu.
(Select) to enter the selection.
to save the settings and return to the previous menu.
(Select) to enter the selection.
to save the settings and return to the previous menu.
.
.
to
to