Publicité
Les langues disponibles
Les langues disponibles
Registering additional baby monitors
The receiver and monitor are already registered together when pur-
chased as a set. The following instructions are for the registration of up to
3 additional monitors:
1. Press any key to switch the display on. Press the menu key
enter the main menu. With the navigation keys, select "Register"
and press the menu key
dure.
2. Baby monitor:
With help of a pointed object (e.g. needle or bent paper clip), press
and hold the register key until the LED blinks.
See the figure below for the location of the register key.
register key
3. When a single prompt tone is heard, the registration of the baby
monitor has been successful. If a double prompt tone is heard, the
registration has failed.
In this case, turn the receiver off. Disconnect the according baby
monitor from the power supply and wait 30 seconds.
Reconnect the power supply. Switch the receiver on again and repeat
from step 1.
Make sure that monitor and receiver are not too far apart.
4. A maximum of 4 monitors can be registered. If an attempt is made
to register more than 4 door monitors, the register interface will
display "Register full".
English 22
once more to start the search proce-
to
Publicité
