Publicité
Les langues disponibles
Les langues disponibles
Reseting the registration
All registered monitors can be deleted. To delete the registered moni-
tors, press and hold the Accept key
neously for 5 seconds. The register interface will then display "Register
deleted".
Viewing monitor feeds
If multiple baby monitors have been registered, the receiver can toggle
between the transmissions of the various baby monitors. Press and
hold the Monitor key
list of the connected monitors. With the Navigation keys "" and "",
select the desired monitor. The images from the selected monitor will
be displayed.
Baby monitor
The baby monitor activates when a certain sound level is detected. The
video receiver sounds an alarm and and the video feed is displayed.
Display of the video will automatically end after 2 minutes.
The internal video feed ends automatically after 5 minutes.
Monitor night vision
The infrared LEDs of the baby monitor will automatically light the scene
when the ambient light becomes too dark. This light is not visible to the
child in front of the monitor.
Video receiver: Setting date and time
1. Press any key to switch the display on. Press the menu key
enter the main menu. With the navigation keys, select "Date &
Time". Press the left key
2. The hours cursor blinks. Adjust the hours with the Navigation keys
"" and "". With the right Navigation key "", select the minutes and
adjust with "" und "" .
3. Press "" again to enter the date setting. As described above, use
"" and "" to adjust the date.
4. Press "Save"
The time format is 24 h and the date format is YY-MM-DD. Date and
time should be set in order to correctly display the time of captured
images. When replacing batteries or in case of a total discharge of the
video receiver's power pack, date and time must be set again.
for 1 second. The video receiver will display a
(Select) to enter the selection.
to save the settings and return to the previous menu.
and the right key
simulta-
EN
to
English 23
Publicité
