Faq Information And Latest Updates - Philips pronto TSU9200/00 Guide De Démarrage

Pronto will not learn codes
• Make sure the Remote Control and the original Remote Control are positioned correctly.
• Do not learn codes under bright fluorescent light or sunlight, as intensive light sources
affect the ability to learn codes successfully.
• Make sure the batteries of the Remote Control and the original remote are sufficiently
charged.
• Press and hold the key on the original remote for more than 1 second.
The Remote Control behaves erratically
Normally, resetting the Remote Control is not necessary. However, if the screen freezes or if
you notice unusual behavior, you can perform a reset to get it running again.
You reset the Remote Control by pressing
7.2

FAQ Information and Latest Updates

You can find more information on www.pronto.philips.com.
Navigate to the Support section for more FAQ Information.
Navigate to the Downloads section for the following updates:
• TSU9200 Remote Control Firmware.
Download this on the Remote Control to upgrade to new features, when the Remote
Control does not start up or when the screen stays black after resetting.
• RFX9200 Extender Firmware.
• Configuration Program Software.
16
and simultaneously.
Support