CK150
2.1
Handling the device
!
WARNING!
• Installation and repair of the extractor hood may only be carried out by
qualified personnel who are familiar with the risks involved and the
relevant regulations.
• Inadequate repairs may cause serious hazards. For repair service,
please contact the service centre in your country (addresses on the
back page).
• People (including children) whose physical, sensory or mental
capacities or whose lack of experience or knowledge prevent them
from using this product safely should not use it without the supervision
or instruction of a responsible person.
• Installation work and electrical wiring must be performed by skilled
technicians in compliance with all applicable regulations and
standards.
• When cutting or drilling into walls or ceilings, make sure that no
electrical cables or hidden devices are damaged.
• To reduce the risk of fire, use only pipes of the UL94-HB class or
higher.
• The distance between the gas hob flame and the extractor hood must
be at least 50 cm.
!
CAUTION!
• The extractor hood must be installed securely so that it cannot fall
down.
• Only operate the extractor hood if you are certain that the housing and
the cables are not damaged.
• Make sure no combustible objects are stored or installed near the air
outlet. A distance of at least 50 cm must be maintained.
• Do not reach into the air outlet or insert any foreign objects into the
device.
EN
Safety instructions
9