Simplified Eu Declaration Of Conformity - Urmet 1051/108 Mode D'emploi

The detector may be installed either vertically or horizontally or onto the ceiling. Each method implies different applications, illustrated
below.
Vertical wall mounting:
The detector is designed to cover an 8 metre curtain area when it is installed from 1.4 to 1.7 metres from the ground.

Avoid mounting over 1.8 metres high because this could compromise the correct functionality of the detector.

Horizontal wall mounting:
When mounted horizontally, the detector has a detection coverage of 5 metres and only for vertical movements. It

cannot detect horizontal movements. This feature is only useful for detecting intrusions in case of access from the top,
e.g. by means of skylights or hatches on the roof.
Avoid mounting under 2.2 metres high because this could compromise the correct functionality of the detector.

Ceiling mounting:
Mount the detector on the ceiling to monitor the crossing of an area in front of a window or a door.

If mounted at a height from 2.4 to 3 m from the ground and oriented downwards, the detector has a coverage of

approximately 5 m from floor level.
Avoid mounting over 4 metres high because this could compromise the correct functionality of the detector.


The arrows show the intrusion movements which are detected in the various mounting positions.
Hereby, URMET S.p.A. declares that the radio equipment type: CURTAIN-EFFECT INFRARED DETECTOR 1051/108 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.urmet.com.
LINK TO ACCESS THE PRODUCT TECHNICAL SHEET AND DOWNLOAD THE COMPLETE MANUAL
DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste electrical and
electronic equipment (WEEE).
The symbol of the crossed-out wheeled bin on the product or on its packaging indicates that this product must not be
disposed of with your other household waste.
Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the
recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the
time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health
and the environment.
For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
DS1051-035
8m

SIMPLIFIED EU DECLARATION OF CONFORMITY

5