1 Safety
1.1 Intended use
In the event of inappropriate or
improper use, damage to the
product and other property may
arise.
The communication unit is used
to control the system. The com-
munication unit is compatible
with the mobile network.
A SIM card for communica-
tion via the mobile network has
already been pre-installed in the
communication unit.
Before the installation, you must
check that the communication
unit is compatible with all of the
components.
Intended use includes the fol-
lowing:
– observance of accompanying
operating, installation and
maintenance instructions for
the product and any other
system components
– installing and setting up the
product in accordance with
the product and system ap-
proval
– compliance with all inspection
and maintenance conditions
listed in the instructions.
Intended use also covers in-
stallation in accordance with the
IP code.
0020282112_01 MiLink Plus Installation instructions
Any other use that is not spe-
cified in these instructions, or
use beyond that specified in this
document, shall be considered
improper use. Any direct com-
mercial or industrial use is also
deemed to be improper.
Caution.
Improper use of any kind is
prohibited.
1.2 General safety
information
1.2.1 Risk
caused by inadequate
qualifications
The following work must only
be carried out by competent
persons who are sufficiently
qualified to do so:
– Set-up
– Dismantling
– Installation
– Start-up
– Inspection and maintenance
– Repair
– Decommissioning
▶ Proceed in accordance with
current technology.
1.2.2 Risk of death from
electric shock
There is a risk of death from
electric shock if you touch live
components.
Safety 1
13