Registration Or Communication Problem With The Server; Decommissioning; Removing The Communication Unit; Recycling And Disposal - Saunier Duval MiLink Plus Notice D'installation

11 Decommissioning

Condition (main display): Meaning of
the main LED (→ Page 19)
Condition (signal strength of the mo-
bile network/communication with the
server): Meaning of the network LEDs
(→ Page 20)
10.4 Registration or communication
problem with the server
▶
Agree with the authorised representat-
ive about whether the communication
unit should be installed (risk of installing
a communication unit in an incompatible
heating system).
Result 1:
Positive response
▶
Complete the installation even if the
server does not respond.
▶
The problem is eliminated remotely
without any invasive work on the
product.
Result 2:
Negative response
▶
Do not install the communication
unit.
11 Decommissioning
11.1 Removing the communication
unit
1. Switch off the power supply of the heat
generator.
2. Disconnect all of the electrical connec-
tions.
3. Unmount the communication unit from
the retainer.
4. Undo the screws on the retainer.
5. Remove the retainer from the wall.
18

11.2 Recycling and disposal

▶
The competent person who installed
your product is responsible for the dis-
posal of the packaging.
If the product is labelled with this
mark:
▶
In this case, do not dispose of the
product with the household waste.
▶
Instead, hand in the product to a collec-
tion centre for waste electrical or elec-
tronic equipment.
If the product contains batteries that
are labelled with this mark, these batteries
may contain substances that are hazard-
ous to human health and the environment.
▶
In this case, dispose of the batteries at
a collection point for batteries.

12 Customer service

Validity: Great Britain
For contact details for our customer ser-
vice department, you can write to the ad-
dress that is provided on the back page, or
you can visit www.glow-worm.co.uk.
Installation instructions MiLink Plus 0020282112_01