Electrical Connection; Cable Laying; Pin Assignment - HBM PW15iA Notice De Montage

Structure and mode of operation
6

Electrical connection

22
Notice
Electronic components are sensitive to electrostatic dis­
charge (ESD). So you must discharge your own static
electricity before touching the connector plugs.
6.1

Cable laying

Position the connection cable so that any condensation
or moisture that may occur at the cable can drip off
(loop). It must not be allowed to reach the transducer.
Also make sure that it is not possible for humidity or
moisture to get into the cables through open ends, thus
preventing damage to the cable sheath.
6.2

Pin assignment

Notice
The electronics must be operated with a supply voltage
of between 12 and 30 V. Incorrect connections between
the supply and interface cables or the digital inputs/out­
puts can cause irreversible damage.
So you must check the correct assignment of the con­
nections before switching on for the first time.
The digital load cell comes supplied with an M12 8‐pin
device socket with internal thread. An M14x1 external
A4359-1.0 HBM: public
PW15iA