Inserting A Microsd Card - Nextbook NXW101QC232 Mode D'emploi

Now the tablet is ready for use.
Note: If the login screen is not enabled in Windows 10, you will be taken directly from
the lock screen to the Start screen.
Turning Off the Tablet
You can turn off the tablet in two ways:
Using the Power button:
1. Press and hold the Power button for at least 4 seconds.
2. Swipe-down the shutdown confirmation screen to the bottom edge of the display
to turn off the tablet.
Using Start menu:
1. Touch the Windows/ Start button to bring up Start menu.
2. Touch Power
Turning On/Off screen
Usually, user can press once the power button to turn on/ off the screen display
Optionally, user can also use the Start menu:
1. Touch the Windows/ Start button to bring up Start menu.
2. Touch Power

Inserting a microSD card

1. Pick up a microSD card.
2. Align the microSD card so that the pins are pointed toward the card slot.
3. Push the microSD card into the card slot until it locks into place.
Removing a microSD card
Caution: Removing the microSD card while it is in use may cause data loss or result
in application errors. Make sure all save operations to the microSD card are complete
before removing the microSD card.
1. Touch the Tray button in the notification area in the lower-right corner of the
screen.
2. Touch Safely Remove Hardware
3. Touch Eject XXXX SD Card. A message appears confirming that the microSD
card can be safely removed. If a
card cannot be removed, ensure all data transfers involving the microSD card are
complete.
4. Press on the microSD card to release it.
5. Slide the card out after it pops out from the microSD card slot.
→ Shut down to turn off the tablet.
→ Sleep to turn off the screen.
warning message appears stating the microSD
.
7
.