Prevention Measures For Users; Personal Safety Measures; Compliance With Safety Measures And Warnings - Bona Scorpion DCS Manuel D'utilisation

Prevention Measures for Users

Personal safety measures

Sawdust can spread through the air and be inhaled when using the sander. Always wear a dust mask when using
the sanding equipment.
The eyes and/or body may suffer injury if personal safety clothing is not used. Always wear safety goggles,
protective clothing and a dust mask during sanding operations.
Lengthy exposure to noise levels during sanding operations may damage the hearing. Always use ear protectors
during sanding operations.
Never become distracted during sanding operations, check what is happening continually. Use common sense.
DO NOT use the machine when tired.

Compliance with safety measures and warnings

Using the machine when not fully assembled may cause
injury or damage to people or objects. DO NOT use the
machine when it is not fully assembled. Keep all fittings tightly
closed. Maintain machine settings in accordance with the
specifications. Using the sander without the safety guards and
covers in position may cause injury or damage. Always ensure
that all safety guards and covers are in position and secured
well.
The sanding machine may create an explosive environment.
Cigarettes, cigars, pipes, lighters, pilot flames, or any other
source of fire may create an explosion if lit during sanding
operations. No sources of fire should be kept near the work
area.
Poorly ventilated work areas may create an explosive
environment when some combustible materials are present in
the atmosphere, such as solvents, thinners, alcohol, fuel, some
paints, wood dust or other combustible materials. Floor sanding
may cause various materials and fumes to ignite. Read the
manufacturer's instructions for each chemical product used and
establish its combustibility. Always keep the work area well-
ventilated.
Striking nails when sanding may generate an explosion or fire.
Always ensure all nails are sunk before sanding surfaces.
12
Serious damage may occur if the power supply circuit trips
repeatedly or is undersized. Have the fuses, safety circuit
and power supply line checked by an authorized electrician.
Performing maintenance and/or repairing the machine when
it is not fully disconnected from the power supply may cause
death due to electrocution. Disconnect the power supply before
carrying out any maintenance and/or repair work.
The use of this machine on a circuit which is not grounded may
cause death due to electrocution. Never disconnect or disable
the grounding conductor. Consult an electrician if the ground
conductor is missing or it is suspected that the circuit is not
suitably grounded.
The use of this machine with a damaged power supply cable
may cause electric shock. Check the power supply cable
regularly for damage such as splitting or wear and tear. DO
NOT use
the machine if the power supply cable is damaged. DO NOT
use the electric cable to move
the machine.
Injury or damage may occur if the machine runs over the
power supply cable and it becomes damaged. Keep the cable
away from the lower part of the machine to avoid contact
with the abrasive. Always keep the power supply cable raised
above the machine.
Bona Scorpion DCS Manual