Conformance; Fcc Notice; Included With Your Picoscope; Minimum System Requirements - pico Technology PicoScope 4444 Guide De Démarrage Rapide

Quick Start Guide
Storage
Altitude
Pollution degree
1.2.6 Care of the product
The product contains no user-serviceable parts. Repair, servicing and calibration
require specialized test equipment and must only be performed by Pico Technology
or an approved service provider. There may be a charge for these services unless
covered by the Pico five-year warranty.
WARNING
To prevent injury or death, do not use the product if it appears to be
damaged in any way, and stop use immediately if you are concerned by
any abnormal operations.
WARNING
When cleaning the product, use a soft cloth and a solution of mild soap
or detergent in water. To prevent electric shock, do not allow water
to enter the oscilloscope casing; this will also cause damage to the
electronics inside.
CAUTION
Do not tamper with or disassemble the oscilloscope, connectors or
accessories. Internal damage will affect performance.
1.3

Conformance

1.3.1

FCC notice

This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference which the user will be required to correct at their own expense.
1.3.2 CE notice
The PicoScope 4444 PC oscilloscope meets the intent of the EMC directive
2014/30/EU and is designed, tested, and certified to the EN 61326-1:2013
Class B Emissions and Basic Immunity standard.
DO282-2
Operating Quoted accuracy
Up to 2000 m
Pollution degree 2
Copyright © 2017 Pico Technology Ltd. All rights reserved.
PicoScope 4444 High-Resolution Differential Oscilloscope
The oscilloscope also meets the intent of the Low Voltage Directive
2014/35/EU and is designed to the BS EN 61010-1:2010 / IEC 61010-1:2010
(safety requirements for electrical equipment for measurement, control, and
laboratory use) standard.
1.4

Included with your PicoScope

Your PicoScope 4444 is supplied with the items shown below.
Item
PicoScope 4444 high-resolution differential oscilloscope
PicoScope 6 software CD
PicoScope 4444 Quick Start Guide
Universal power supply
USB 3.0 cable, 1.8 m
A number of accessories are available, including a selection of voltage and current
probes and D9-BNC adaptors. See the PicoScope 4444 Data Sheet, available from
www.picotech.com/downloads, for more information.
Convenient pre-configured kits are available from our distributors. Alternatively, you
can devise your own configuration at:
www.picotech.com/oscilloscope/picoscope-4000-series
1.5

Minimum system requirements

To make sure your PicoScope 4444 oscilloscope operates correctly, you must have a
computer with the system requirements shown in the table below. The performance
of the oscilloscope will improve with a more powerful PC and will benefit from a
multi-core processor.
Operating
system
Processor
Memory As required by the operating system
Free disk space
Ports
* Linux and OS X both require PicoScope Beta software, available from
www.picotech.com/downloads.
Order code
Specifications
Microsoft Windows 7, 8 or 10.
Linux or OS X*
32-bit and 64-bit versions.
One free USB 2.0 or USB 3.0 port
PQ088
DI025
-
PS011
TA155
3