General; Conventions; Symbols And Labels; Limitation Of Liability - Stiga SWP 475 Manuel D'utilisation

General

1. General
This operating manual is a part of the device
Sweeping Machine SWP 475 and SWP 577 and
is valid only for the named devices.
This operating manual provides important
information for the safe and effi cient use of the
machine.
A requirement for safe operation of the machine
is the adherence to all of the safety and operation
instructions provided.
• Read the operating manual carefully before
using the device.
• Read the safety instructions!
• Keep the operating manual safe and
accessible during the lifespan of the device.
• Pass the operating manual onto any
EN
subsequent owner or user of the device.

1.1 Conventions

To be able to work optimally with the operating
manual, please note the following explanations of
the typographical conventions.
Numbering
• The texts shown are fi rst level numbering
points.
Work sequence
1. Step 1 of the work sequence
2. Step 2 of the work sequence
3. Step 3 of the work sequence
The sequence of the work steps must be
observed.
Tip
» Tips and notes (not machine damage) are
shown like this.
60
SWP 475 / 577
1.2 Symbols and labels
All warnings and safety instructions must be
complied with! When working, always act with
caution to prevent accidents, personal injury and
damage to property!
Safety instructions
SIGNAL WORD
Type and source of hazard Type and source of hazard
Possible consequences Possible consequences
• Measures for avoiding danger • Measures for avoiding danger
Risk level
Risk level Probability
of occurrence
DANGER Direct
Possible
WARNING
CAUTION Possible
NOTE Possible
1.3 Limitation of Liability
The manufacturer does not accept any liability for
damage and consequential damage caused by
the following points:
• Failure to observe the operating instructions
• Use of nonapproved replacement parts /
wrong spare parts / spare parts that do not
correspond to the manufacturer's specifi cation
• Unauthorized changes, additions to and
modifi cations to the device

1.4 Warranty

The provisions that are described in the general
terms and conditions of the manufacturer apply.
Consequences
in the event of
noncompliance
Death, serious injury
Death, serious injury
Slight injury
material damage