Zeiss M LED Mode D'emploi page 3

Stand M LED
1 INTRODUCTION
Stand M LED is an accessory for the Stemi 305 or Stemi 508 stereo microscopes.
The present operating manual is valid only in conjunction with the operating manuals of
Stemi 305 or Stemi 508. Users must read them carefully, as well as the instructions regarding
their safety and installation aspects. The safety information concerning the Stand K EDU/LAB
that is contained, also applies for Stand M LED.
Please find actual and complete operation manuals in several languages in the Download
Area of the following Websites:
www.zeiss.de/Stemi305
www.zeiss.com/Stemi305
www.zeiss.de/Stemi508
www.zeiss.com/Stemi508
Stand M LED is the large desktop stand for the Stemi 305 or Stemi 508 stereo microscopes. Thanks to
its generously proportioned work surface and 350 mm high focusing column it is suitable both for use
with elongated or tall samples as well as for parallel working with multiple samples.
Stand M LED contains electronics for controlling the K/M LED reflected and transmitted light
illumination units (accessories).
This operating manual describes the installation and operation of Stand M LED, as well as the optional
transmitted light illuminators:
− Transilluminator Brightfield M LED
− Transillumination Unit M LED.
For detailed information on reflected-light illuminators refer to the Stemi 305 / 508 operating manuals.
06/2016
INTRODUCTION
435425-7144-008
ZEISS
1