Mounting instructions information
The mounting instructions come as part of the Duravit
product and must be read carefully prior to installation.
Explanation of the key words and symbols
Indicates a hazardous situation which,
DANGER
if not avoided, will result in death or
serious injury.
Is used to address practices not related
NOTE
to physical injury.
Link to the Electrical installation section
Link to the mounting instructions in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and leak-tightness
Indication of the temperature
Do not kink hose
Control unit
(Number depends on the whirl system)
>
Action required
Target readership and qualifications
The product may only be installed by a qualified plumber.
The electrical installation should only be carried out by
qualified electricians.
Safety instructions
Risk of fatal electric shock
Contact with electricity can lead to an electric shock.
> Carry out the electrical installation in accordance with
the national, European and international directives and
standards.
> Do not remove any individual components.
> If the supply cord is damaged, it must be replaced by the
manufacturer, the service agent or similarly qualified
persons in order to avoid a hazard.
> Parts incorporating electrical components, except
remote control devices, must be located or fixed so that
they cannot fall into the bath.
> Parts containing live parts, except parts supplied with
safety extra-low voltage not exceeding 12 V, must be
inaccessible to a person in the bath.
Product and / or property damage
Careless handling can result in damage to the surface of
lacquered bathtubs.
> Protect the bathtub from knocks and scratches during
installation and transport.
The breach of local and country-specific regulations and
standards can cause damage to the product and / or
property damage.
> Observe the local installation regulations and any
country-specific standards at all times.
7
57081_WH_M_Acrylic_FST/19.05.3