Task 5: Performing The Initial Setup - Promise Technology VTrak E-CLass Guide De Démarrage Rapide

Task 5: Performing the Initial Setup

The VTrak's default network settings are DHCP enabled. The Bonjour service on
the VTrak enables your Safari browser to find the VTrak on the network and
establish a connection automatically.
Establishing a Connection with VTrak
To establish an Ethernet connection between your Mac and the VTrak:
1. Be sure the VTrak is connected to the network and powered on.
See "Task 3: Making Management and Data Connections" on page 7 and
"Task 4: Powering On the System" on page 15.
2. On your Mac Desktop, launch Safari.
3. In Safari, click the Show all bookmarks icon.
See Figure 13.
Figure 13 Show all bookmarks icon
Click the Show all
bookmarks icon.
The Collections list appears. See Figure 14 on page 18.
4. Under the Collections list, click the Bonjour icon.
The Bonjour links appear in the Bookmarks list. Each VTrak on your network
is listed by its World Wide Node Name (WWNN).
Task 5: Performing the Initial Setup
17