Delivery Content - VOLTCRAFT GM-100 Notice D'emploi

A triangle containing an exclamation mark indicates important information in these oper-
ating instructions which is to be observed without fail.
This product has been CE-tested and meets the necessary national and European
guidelines.
The "hand" symbol informs you that there are special tips and hints concerning the
operation.
For safety and licensing reasons (CE), unauthorised conversion and/or modification of the device is
not permitted.
Measuring instruments and accessories are not toys and have no place in the hands of children!
On industrial sites the accident prevention regulations of the association of the industrial workers' soci-
ety for electrical equipment and utilities must be followed.
Working with magnetic components and spending time in magnetic environs can lead to dangerous
malfunctions for people with pacemakers.
In schools, training centres, computer and self-help workshops, handling of measuring instruments
must be supervised by trained personnel in a responsible manner.
Do not switch the measuring instrument on immediately after it has been taken from a cold to a warm
environment. The condensation generated could cause serious damage to the device. Allow the
device to reach room temperature before switching it on.
Do not leave packaging material laying around carelessly. This could be a dangerous toy for children.
The meter may not be operated in areas where there is a danger of explosion.
You should also heed the safety instructions in each chapter of these instructions.

Delivery Content

Magnetic Field Meter GM-100
External Measuring Sensor
Plastic Case
Operating Instructions
20