Appliance Description; Operating The Hob With The Touch Keys - Teka IR 624 Instructions De Montage Et D'utilisation

Appliance description

The decorative design may deviate from the illustrations.
A. Induction cooking zone back left
B. Induction cooking zone back right
C. Induction cooking zone front left
D. Induction cooking zone front right
E. Touch-Control operating panel
F. Cooking zone back left (radiant heating element)*
G. Cooking zone back right (radiant heating element)*
* For this model the two cooking zones at the back are
equipped with radiant heating elements (they are not
induction-heated). Pots and pans do not need to have
magnetic properties.
1. Power setting display
2. Stand-by dot (cooking zone)
3. Cooking zone selection button
4. Power button
Induction: Power boost
Radiant heating elements: Switching on the second element
5. Plus button (raise)
6. Minus button (lower)
7. Timer indicator lamp
8. Switch-off time display
9. Stand-by dot for the automatic switch-off device
10. Timer selection button
11. STOP button
12. ON/OFF button
13. Minute minder lamp
14. Not present for all models
20

Operating the hob with the touch keys

The ceramic glass hob is operated with touch control sensor
buttons. The touch keys are operated as follows: touch a symbol
on the surface of the ceramic glass plate. A buzzer will indicate
when the controls have been operated correctly. The touch
control sensor button will then be indicated as "button".
ON/OFF button (12)
This button is used to switch the entire hob on and off. It is, as it
were, the main switch.
Cooking zone selection button (3)
Pressing one of the cooking zone selection buttons available will
select a cooking zone, for which the plus button
button may be used to set the cooking level.
Minus button (6) / Plus button (5)
These buttons are used to set the cooking levels, the automatic
switch-off device and the minute minder. The minus button
reduces the setting and the plus button raises it. The setting will
be shown when both buttons are pressed simultaneously.
Power setting display (1)
The power setting display shows the power setting which has
been selected, or:
H Residual heat
P Power boost setting
Pan recognition device
A Automatic parboiling mode
STOP Stop function
L Childproof lock
STOP button (11)
The STOP function can be used to briefly stop the cooking
process.
Timer selection button (10)
For programming the automatic switch-off device (timer) and the
minute minder.
GB
Hob
Cooking zone
or the minus
A
p
pl ia
n
c e
d
e s
cr
ip ti
o
n