SOLAC espression CA 4805 Mode D'emploi page 41

5. Place the cup or jug with the liquid you
wish to heat. To obtain steam, turn the
steam regulator counter clockwise.
Close the steam regulator when you
have heated the liquid. Note: To skim
or heat milk, move the jug or cup in
circles.
6. Remove the cup or jug with the liquid
when it is hot or when the milk has
been skimmed or heated.
7. Press the "steam" button again to deactivate the steam
function.
8. The coffee machine will stabilise the internal system
temperature automatically. This automatic process lasts
approximately 25 seconds, during which time the water
will be driven through the coffee outlet. During this
time, the light on the steam icon will flash.
9. The coffee machine is now ready to prepare the coffee.
The lights on the two coffee extraction selectors will be
lit to indicate that it is ready.
14 CAPPUCCINO
1. Fill 1/3 of the cup with cold milk (in a large cup).
2. Ensure that you have selected the steam
function and that the cof fee machine is
ready.
3. Place the cup or jug under the steamer.
Open the steam regulator to drain any
residual water present in the steamer.
When steam is driven through the noz-
zle, close the steamer.
4. Place the cup with the milk under the
steamer.
5. Open the steamer, turning the steam
regulator.
6. Move the cup in circular movements to evenly heat up the milk.
7. Next, skim or heat the milk. Close the steam output.
8. Press the "steam" button again to deactivate the steam function.
11