Yamaha YAS-306 Guide De Démarrage Rapide page 14

PLAYBACK ➤ Operations
14
En
7
INFO key
While the INFO key is held down, status, including
the type of audio signal being input and whether
the clear voice function is enabled or disabled, can
be confirmed by the glowing of indicators.
Type of audio signal being input
DTS Digital Surround
Green
Dolby Digital
Green
Dolby Pro Logic II is used (when 2-channel
stereo signal is played in surround)
Unit functions and positioning
The bass extension function is enabled
8
The clear voice function is enabled
9
When positioned on top of something, such as a TV stand
When mounted on a wall
HINT
• The unit is able to play the following types of audio signal.
The indicators do not glow when analog or PCM audio signal
is input.
− Analog signal
− PCM (2 channels)
− Dolby Digital
− DTS Digital Surround
8
DIMMER key
Change the brightness of the indicators. Each time
Green the key is pressed, the brightness of the indicators
changes as follows.
Dim (default setting) → Off → Bright
↑
Indicators glow brightly just after operation and
change to the specified brightness after a few
Green
seconds.
Green
9
Green
LEARN key
Blue
The unit enters learning mode, in which it can
learn TV remote control commands (p.19).