Flight Control - XciteRC HotBee 120 3D Mode D'emploi

Flight control

Mode 2 (throttle stick at left hand)
1. When moving the aileron slick left or right, the
helicopter accordingly flies left or right.
3. When moving the rudder stick left or right, the
head of helicopter accordingly flies left or right.
Rollflight practice
The HotBee 3D Quadrocopter can finish excited stunts actions,such as the front and back, right and left
rolls. Matters need to be attention when the first flight:
• Choose a spacious ground with soft grass to practice.
• Select roll flight mode.
• Advise beginner to increase servo distance of ELEV and AILE of the transmitter to 100%-110%. And can
adjust according to personal skill level. The default selling is 100%.
• Practice of throttle slick: when the Hotbee 3D roll from normal status,the throttle stick need to be pulled
• down slowly; push up the throttle when it exchanged normal status to roll. Please adjust according
• to personal skill level.
Mode 1 (throttle stick at right hand)
1. When moving the aileron stick left or right, the
helicopter accordingly rolls left or right.
15000000 XciteRC Hotbee 3D Quadrocopter
2. When moving the throttle slick up or down, the
helicopter accordingly flies up or down.
4. When moving the elevator stick up or down,
the helicopter accordingly flies forward or back-
ward.
2. When moving the elevator stick up or down,
the helicopter accordingly rolls forward or back-
ward.
EN
21