SilverCrest SPBS 5000 A1 Mode D'emploi page 13

Variant B
Variant B is suitable for attaching the device to a pane of glass.
♦ Attach the four suction cups
shown in "Figure B".
♦ Push the suction cups
♦ Now fasten the suction cups
openings.
♦ Now mount the brackets
pushing the retaining lugs into the corresponding slots on the
rear of the device and locking them in place.
Figure B
♦ You can now attach the device to a pane of glass using the
suction cups
│ GB │ IE │ NI
■ 10
into the large holes.
on the underside of the device by
.
to the two brackets
by sliding them into the narrow
SPBS 5000 A1
, as