Télécharger Imprimer la page

POWER SMITH PWLD200T Notice D'utilisation page 4

Publicité

Les langues disponibles

Les langues disponibles

ASSEMBLY INSTRUCTIONS
settInG Up anD aDJUstInG tHe
tRIpoD (FIG 2)
1.
Loosen the tripod locking knob (F).
2.
Push down the leg connector (A) until the legs (B) are
fully extended and firmly tighten the locking knob (F).
3.
Adjust the height of the tripod by unlocking the flip
locks (C1 & C2) and raising the center poles (D1 & D2)
of tripod. Lock the flip locks when the tripod reaches
desired height.
4.
Loosen the twist collar (C3) and adjust the extendable
leg (B2) to level the tripod on uneven surfaces. Tighten
the collar (C3) after leveling.
NOTe:
The maximum height of this tripod is 65".
attacHInG tHe WoRk LIGHt
asseMBLY to tHe tRIpoD (FIG 3)
1.
Place the work light assembly on top of the tripod.
2.
Use the bracket locking system (E1, E2 and E3) to secure
the work light assembly to the tripod as shown in FIG 3.
NOTe:
Make sure the two locking brackets (E1) are over the
raised metal plate in the middle of the stand.
OPERATION
aDJUstInG tHe LIGHt DIRectIon
Your work light can be tilted vertically up to 30° down or
90° up.
To Adjust the Light Direction, loosen the side locking
knobs (4-FIG 1). Adjust the work light head to desired
position, and retighten knobs.
sWItcH actIon
Each of the work light head is equipped with an On/Off
switch (5-FIG 1) located on the back side of the work light.
Press the switch once to turn the work light on and press
the switch a second time to turn it off. Always turn the work
light off before unplugging.
MAINTENANCE
WaRnInG:
Always make sure the work light
is unplugged and completely cool before attempting to
clean it.
Your work light requires very little care and maintenance.
Simply clean the lens regularly with a non-abrasive cleaner.
English
This product is warranted free from defects in material and
workmanship for 5 (Five) years after date of purchase. This
limited warranty does not cover normal wear and tear or
damage from neglect or accident. The original purchaser is
covered by this warranty and it is not transferable. Prior to
returning your product to store location of purchase, please
call the Toll-Free Help Line for possible solutions.
For questions about this or any other PowerSmith
product,
Please call Toll-Free:
Or visit our website:
www.
powersmithproducts.com
4
WARRANTY
HELP LINE
888-552-8665.
®

Publicité

loading