Haier HTF-540DGG7 Mode D'emploi page 12

Intended use
EN
CAUTION!
When you close the door, the vertical door strip on
1.
the left door should be bent inside (1).
If you try to close the left door and the vertical door
2.
strip is unbent (2), you should bend it firstly, other-
wise the door strip will hit the fixing shaft or right
door. Thus a damage to the door slip or a leak will
occur.
There is a heating thread inside the frame. The tem-
perature of the surface will rise a little, which is nor-
mal and won´t affect the function of appliance.
10