Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
it en
PARTS AND FEATURES
1.
Operating lever
2.
Cancel button
3.
Fine tuning/Favourite button
4.
Defrost button
5.
Reheat button
6.
Toasting level buttons
7.
Display
8.
Cord wrap
9.
Removable crumb tray
10. Warming rack
INTRODUCTION
Thank you for purchasing our product.
In doing so, you have opted for an effective high-
performance appliance.
If the instructions on the correct use of this appliance
are not observed, the manufacturer shall assume no
responsibility for any resulting damage.
The operating instructions may refer to different
models: any difference is clearly identified.
BEFORE FIRST USE
Carefully wipe the outside of the appliance to remove
any dust that may have accumulated. Dry with a dry
cloth. Remove any stickers. As there is manufacturing
residue or oil remained in the toaster or heat element,
it usually will emit an odor for the first use. It is normal
and will not occur after several times use. Before the
first use, with the window open operate without any
bread inside. Then let the toaster cool down and begin
toasting.
USING THE TOASTER
1.
Put the food to be toasted into the bread slot.
No more than one slice for each slot can be
introduced at any one time.
Make sure the crumb tray is perfectly in
place before using.
2.
Plug the power cord into the outlet.
3.
Set the toasting level to the desired colour using
the toasting level buttons. The lowest level is 1
and the highest level is 8. The bar at the bottom
of the display will show the set level.
14
If you toast the food continuously, the
toasting colour of the different slices can
be slightly different or darker, even if the same
level is used.
4.
Pull down the operating lever until it engages:
toasting will begin at once. The display will show
the countdown till the end of toasting. Once the
bread has been toasted to the preset level, the
operating lever will automatically spring up.
The operating lever can rest on the bottom
of the slot only if the plug was connected.
5.
During the toasting process, if the browning is
satisfactory, press the CANCEL button to stop
toasting.
6.
If the bread was taken out of the freezer, set
the toasting level according to your preference.
Press the DEFROST button to toast it to your
desired color, then pull down the operation lever
until it is in place. The related symbol will appear
on the display.
7.
If you want to reheat any cold toasted bread,
press the REHEAT button. Toasting time is fixed
in this mode: when time is over the operating
lever will automatically spring up and stop the
reheating process. The related symbol will
appear on the display.
Press the FINE TUNING/FAVOURITE button
by a single click to set an intermediate level
of browning between the current setting and the
further one.
By pressing the FINE TUNING/FAVOURITE
button longer, the FAVOURITE setting is
activated.
Every time the toaster will be plugged in, the
stand-by mode will automatically be set on the
favourite setting.
Toast any items only until they are golden
brown and not brown or too dark.
Remove any burnt edges. Do not over-toast
food containing starch - especially grain and
potato products - to reduce the production of
acrylamides.
If a slice gets stuck at the end of the toasting
process, pull the power plug and carefully remove
the bread after the toaster has cooled down.
The use of browning levels from 4 to 6 is
recommended
sandwiches.
for
the
preparation
of
Publicité
Table des Matières
