Electrical Connections; Correct Use - Hotpoint Ariston TT 12E UM0 Mode D'emploi

it en
• Do not use extension leads, multiple sockets or adapters. Do not connect the
appliance to a socket which can be operated by remote control.
• The power cable must be long enough for connecting the appliance, once fitted
in its housing, to the main power supply.
• Do not pull the power supply cable.
• If the power cable is damaged it must be replaced with an identical one. The
power cable must only be replaced by a qualified technician in compliance
with the manufacturer instructions and current safety regulations. Contact an
authorized service center.
• Do not operate this appliance if it has a damaged mains cord or plug, if it is not
working properly, or if it has been damaged or dropped. Do not immerse the
mains cord or plug in water. Keep the cord away from hot surfaces.
• Do not touch the appliance with any wet part of the body and do not operate it
when barefoot.

ELECTRICAL CONNECTIONS

Socket outlet / plug
If the fitted plug is not suitable for your socket outlet, contact After-Sales Service for
further instruction. Do not attempt to change the plug yourself. This procedure needs
to be carried out by a qualified technician in compliance with the manufacturer's
instructions and current standard safety regulations.

CORRECT USE

• Never cover the toaster slot.
• Do not touch parts other than the operating controls, as the
toaster will can become hot during toasting.
• Do not introduce any object inside the toaster, as this may cause damage or
risks.
• Pull down the operating lever only for toasting: never block it.
• Make sure the crumb tray is perfectly in place before using.
• Never place aluminium foil on the warming rack. Never warm and toast at the
same time.
• Avoid toasting food with extremely runny ingredients such as butter.
12