Rane BLACK&BLUE Guide D'utilisation page 10

Operation
Pairing Bluetooth Sources
1. Connect the 3 included Bluetooth antennas to the connectors on Black & Blue's
rear panel.
2. Power on Black & Blue. The power LED will illuminate solid.
3. Press and hold the Pair button for 3 seconds for the particular Bluetooth input
you desire to connect to for your Bluetooth source. The Pair LED will flash.
4. Pair your Bluetooth source to Black & Blue.
a. Smartphone: open Bluetooth settings in your smartphone, find RA08-A,
and connect. The pair LED on Black&Blue will be lit solid once connected.
b. Bluetooth headset mic: turn on the headset mic. The mic LED will flash
quickly when searching for Black & Blue. When paired successfully, the
mic LED will flash slowly and Black&Blue's pair LED will be lit solid.
Note: If the mic connects with a different Bluetooth source (for example, RA08-A)
which is not desired, press the search button on the Bluetooth headset mic and
connect to the next Bluetooth source (RA08-B or RA08-C).
Note: Repeat the above steps to connect to the other Bluetooth inputs.
Selecting Sources
1. Connect the included Bluetooth antennas to the connectors on Black & Blue's
rear panel.
2. Press and hold the Pair button(s) for 3 seconds to connect to your Bluetooth
source(s).
3. Use the included USB cable to connect Black & Blue's USB port to an available
USB port on your computer.
4. Adjust the Listen To knob to choose whether to monitor Bluetooth A, B, C, or
Computer. Press the Mix button to monitor a mix of all sources from the Master
output or Power Amplifier output.
5. Turn the Master Volume knob to adjust the signal level sent to the Master
output and Power Amplifier output.
10