Uberhaus 05775003 Guide De L'utilisateur page 7

Or
2、 、 、 、 Start and select working mode
Or
3、 、 、 、 Setting electro lock
Locking can be set in both power-on and power-off modes.
And
And
4、 、 、 、 Setting room temperature
Or
Or
Turn on or off the heater by pressing the ON/OFF button on the
control panel or by pressing the Power button on the supplied
remote control.
Once power is off, heating elements will stop working first. Fan
will continue working for up to 3 minutes to dispense residual
heat inside the heater. This is a normal function.
Select a heat setting.
Press the MODE button to toggle between the three heat
settings.
High mode uses 1500W; low mode uses 1000W. ECO mode
is an energy-saving function. When the ECO mode is chosen,
the heater will set the temperature automatically to 68ºF
(20ºC).
Press Temp Up and Temp Down buttons together for 3
seconds. Locking is confirmed when a buzzer sound is heard.
When locked, the control panel and the remote control will not
function.
To unlock, press Temp Up and Temp Down buttons together
for 3 seconds. Unlocking is confirmed when a buzzer sound is
heard. Lock indication disappears. Control panel and remote
control return to normal function.
Or
Adjust the thermostat by pressing the arrows on the control
panel or remote control.
7