Important Notes; Technical Specifications - Franke ZAQUA007 Notice De Montage Et De Mise En Service

3.

Important Notes

• Installation, commissioning and maintenance are to be performed only by a
qualified technician according to the instructions provided.
• Legal requirements and the technical connection regulations of the local electricity
supply companies must be complied with.
• Only appliances with protection class III (SELV) may be connected to the unit.
• Proper cooling must be assured. To ensure an unimpeded flow of cooling air, it is
important to provide a minimum distance of 15 mm to neighbouring parts.
• All rights reserved to make technical alterations.
4.

Technical Specifications

Product group:
EMC:
Electrical safety:
Type of protection:
Protection class:
Test voltage:
Dimensions W × H × D:
Ambient temperature:
Cooling:
Storage temperature:
Input
Input AC:
Rated current:
Overvoltage protection:
Connections:
2000100375
2000102691
4
Primary switched-mode voltage regulator (single
phase, primary switched power supply)
61204-3
EN 60950/ VDE 0805 SELV
IP 68
II
4.2 kV DC
41 × 23 × 90 mm
-10 to +50 °C
Natural convection
-25 to +60 °C
Rated voltage 230 V AC / 50 – 60 Hz
Range 180 – 264 V
0.15 A at 230 V AC
Varistor in the input circuit
1.5 m mains line with Euro plug
Power cord with wire-end ferrules