Velleman AC97 Notice D'utilisation page 2

AC CURRENT TRANSDUCER
1. SAFETY
The AC current transducer has been designed in accordance with IEC-
1010 safety requirements for hand-held current clamps for electrical
measurement and test.
Follow all introduction and operating requirements to ensure that the
current clamp is used safely and is kept in good operating condition.
1.1 SYMBOLS
2. DESCRIPTION
Refer to the Fig. 1 and to the following numbered steps to familiarise
yourself with the AC current transducer.
Transformer Jaws
Designed to pick up the AC current flowing through the conductor.
Hand Guard
Designed to protect the user for safety.
Trigger
Press the lever to open the transformer jaws.
AC97
Important safety information,
consult to the operating manual.
Double insulation
(Protection class II)
2 VELLEMAN