Weekly Timer - Mitsubishi Electric PAC-IF013B-E Manuel D'installation

5. Remote controller operation
5.6. Timer and Weekly timer
The settings for Timer and Weekly timer operation can be made from the remote
controller.
Press button 4 ( MENU ) to go to the Main menu, and move the cursor to the
desired setting with button 7 ( F1 ) or 8 ( F2 ).
Timer
•
On/Off timer
Operation On/Off times can be set in 5-minute increments.
•
Auto-Off timer
Auto-Off time can be set to a value from 30 to 240 in 10-minute increments.

Weekly timer

Operation On/Off times for a week can be set.
Up to eight operation patterns can be set for each day.
5.7. Service
Maintenance password setting
•
The initial administrator password is "9999". Change the default password
as necessary to prevent unauthorized access. Have the password
available for those who need it.
•
If you forget your administrator password, you can initialize the password
to default password "9999" by pressing and holding the F1 and F2 buttons
simultaneously for three seconds on the maintenance password setting
screen.
5.8. Others
The following functions are NOT available.
(1) In main menu (Press button 4 (MENU), main menu appears.)
•
"Vane Louver Vent (Lossnay)"
•
"High power"
•
"OU silent mode"
•
In "Energy saving" menu, "schedule" function is NOT available.
•
"Filter information"
•
"Maintenance"
•
In "Service" menu, "Drain pump test run", "Check" functions are NOT
available, except for "Request code" in "Check" function.
Main Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Main display:
Cursor Page
F1 F2 F3 F4
19