External Cleaning; Internal Cleaning; Troubleshooting - ARTHUR MARTIN ASF9500LOX Notice D'utilisation

18
1. Release the stoppers on the sides of
the sliding rails of the cutlery drawer
and pull the drawer out.
2
2. Move the upper basket to the lowest
level to reach the spray arm more
easily.
3. To detach the spray arm (C) from the
delivery tube (A), turn the mounting
element (B) counterclockwise and pull
the spray arm downwards.
4. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes. Run the water through
the holes to wash soil particles away
from the inside.

TROUBLESHOOTING

If the appliance does not start or it stops
during operation, first check if you can
solve the problem by yourself with the
help of the information in the table or
contact an Authorised Service Centre.
1
5. To install the spray arm (C) back,
insert the mounting element (B) in the
spray arm and fix it in the delivery tube
(A) by turning it clockwise. Make sure
that the mounting element locks into
place.
6. Install the cutlery drawer on the sliding
rails and block the stoppers.

External cleaning

• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive
cleaning pads or solvents.

Internal cleaning

• Carefully clean the appliance, including
the rubber gasket of the door, with a
soft damp cloth.
• To maintain the performance of your
appliance, use a cleaning product
designed specifically for dishwashers at
least once every two months. Carefully
follow the instructions on the packaging
of the product.
• Do not use abrasive products, abrasive
cleaning pads, sharp tools, strong
chemicals, scourer or solvents.
• Using short-duration programmes
regularly can cause grease and
limescale buildup inside the appliance.
Run long-duration programmes at least
twice a month to prevent the buildup.