Klauke TEXTRON Mode D'emploi page 6

Bedienungsanleitung EK 120/42
__________________________________________________________________________________________________________________
8. Technische Daten
Gewicht des kompl. Gerätes: ca. 7,2 kg (inklusive Akku)
Preßkraft:
Hub:
Antriebsmotor:
Akkuspannung:
Akkukapazität:
Akku-Ladezeit:
Preßzeit:
Pressungen pro Akku:
Hydrauliköl:
Umgebungstemperatur:
Schalldruckpegel:
Vibrationen:
Anmerkung
Diese Bedienungsanleitung kann jederzeit kostenlos unter der
Bestell-Nr. HE.9605_G nachbestellt werden.
ca. 120 kN
42 mm
Gleichstrom-Permanentfeldmotor
12 V
3 Ah [RA5]
ca. 1 h [LG 4], bzw. ¼ h [LG5]
12 s bis 16 s (abhängig vom
Verbinderquerschnitt)
ca. 45 Pressungen
(Cu 150 mm² DIN 46235)
ca. 190 ml "Shell Tellus T 15"
-20°C bis +40°C
70 dB (A) in 1m Abstand
< 2,5 m/s (gewichteterEffektivwert
der Beschleunigung)
Instruction Manual
for the electric-hydraulic crimping unit Type EK 120/42,
Serial-No. .......................
Index
1 Introduction
2 Labels
3 Warranty
4 Description of the electric-hydraulic crimping unit
4.1 Description of the components
4.2 Brief description of the important features of the unit
4.3 Description of the light diode display
5 Remarks in respect of the determined use
5.1 Operation of the units
5.2 Explanation of the application range
5.3 Mounting instructions
5.4 Service and Maintenance instructions
5.5 Remarks on the use of the Battery Cartridge and Charger
5.6 Storage and transport of the crimping unit.
6 Troubleshooting
7 Putting out of operation/waste disposal
8 Technical data
Symbols
Safety warnings
Please do not disregard these instructions in order to
avoid human injuries and environmental damages.
Operational warnings
Please do not disregard them to avoid damaging the
pump unit.
1. Introduction
Before starting to use the tool please read the
instruction manual carefully.
Use this tool exclusively for its determined use.
Mounting and assembly of connecting material with the help of
this tool must only be performed by specially trained personnel.
The minimum age is 16 years.
This instruction manual has to be carried along during the entire
life span of that tool.
The operator has
- to guaranty the availability of the instruction manual for the user
and
- to make sure, that the user has read and understood the
instruction manual.
2. Labels
On the labels fixed on the housing of the tool you'll find the type
specification name of the manufacturer and the company logo. On
the opposite side of the housing you'll find a label with a brief
presentation of the scope of manageable cross-sections for copper
and aluminium and the crimping force. The serial number is
located on the hydraulic cylinder between the housing and the
crimping head. On the crimping head you'll find a warning against
possible injuries during the crimp process.
3. Warranty
If correct operation is guaranteed our warranty is 6 months from
the time of delivery unless otherwise specified by local guidelines
and law.
4. Description of the electric-hydraulic crimping unit
4.1. Description of the components
The electric-hydraulic crimping unit type EK 120/42 is a hand held
tool and consists of the following components:
Seite 6