Lubrication - DeWalt DC330 Traduction De La Notice D'instructions Originale

Sawing in Metal
• Mount an appropriate saw blade.
• Proceed as described above.
CAUTION: Use a cooling lubricant
(cutting oil) to prevent overheating of the
saw blade or the workpiece.
MAINTENANCE
Your D WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk of
serious personal injury, turn tool
off and disconnect battery pack
before making any adjustments or
removing/installing attachments or
accessories. An accidental start-up
can cause injury.
The charger is not serviceable. There are no
serviceable parts inside the charger.

Lubrication

LUBRICATING THE GUIDE ROLLER (FIG. C)
• Apply a drop of oil to the guide roller (7) at
regular intervals to prevent jamming.
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect
the charger from the AC outlet before
cleaning. Dirt and grease may be
removed from the exterior of the charger
using a cloth or soft non-metallic brush.
Do not use water or any cleaning
solutions.
Optional Accessories
WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D WALT, recommended
E
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
These include:
– DE3241 Parallel guide
– DE3242 Trammel bar
– 581281-00 Dust extraction adapter
– 581239-01 Dust extraction shroud
– 402140-00 Anti-splinter shoe insert
– 581268-00 Anti-scratch shoe cover
The following replacement blades are available:
– DT2209 Clean wood cutting blade
– DT2213 Fast wood cutting blade
– DT2160 Metal cutting blade
– DT2074 Flush cutting blade*
*Not available in all countries
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
EN GL I SH
WALT, have
E
WALT product
E
43