Jydepejsen Cosmo Mode D'emploi page 35

Re-mounting of the glass takes place in the opposite order.
Change of the vermiculite panels
1. Take out the front smoke deflector plate.
2. Push the rear edge of the baffle plate upwards, to take out the rear panel in the combustion chamber.
3. Remove the two small, bevelled side panels.
4. Remove thae two side panels in front. (Does NOT apply to Cozy Sideglass)
5. Now you can remove the lower baffle plate.
6.
Then lastly, remove the top smoke deflector plate.
Change of the vermiculite panels takes place in the opposite order.
Jydepejsen A/S – September 2019