Download Scanning Suite; Using Your Scan Tool; Locating Data Link Connector - Bosch OBD1150 Guide De Démarrage Rapide

en

2 Download Scanning Suite

√ Go to www.boschdiagnostics.com/downloads and download the
Scanning Suite PC application.
√ Scanning Suite is NOT required to operate the Scan Tool.
√ Install the downloaded Scanning Suite application prior to connec-
ting the Scan Tool to the PC.
√ Some of the items included in Scanning Suite are:
– Tool update software
√ To be able to use Scanning Suite the PC must meet the following
minimum requirements:
– Microsoft Windows 7, 8, and 10.
– Adobe Acrobat Reader
– Screen Resolution of 800 x 600
> If screen resolution is 800 x 600, in Display Properties, Settings
Tab, set Font Size to Small Fonts.
√ Use Scanning Suite to determine if any updates are available for
your tool by clicking Check for Update button.
√ You can also configure the Scanning Suite Frequency (SS Fre-
quency) to automatically check every xx minutes. The default fre-
quency is 30 minutes.
√ Refer to instructions provided on www.boschdiagnostics.com/
downloads for how to install Scanning Suite and Tool updates.

3 Using Your Scan Tool

3. 1 Locating Data Link Connector

• The OBD II Data Link Connector (DLC) is
usually located under the driver's side dash.
• Refer to user's manual for DLC location.
• For more information, go to http://www.
obdclearinghouse.com/oemdb.
Bosch Automotive Service Solutions Inc.
| OBD 1150 | Quick Start Guide | 5
575608 REV B | 03.2016