RINSE
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. For cycles that use
a spray rinse you will hear water enter the washer as the
tub spins, allowing the rinse water to penetrate the clothes.
For cycles that use the 2nd rinse option, you will hear
sounds similar to the wash cycle as the washer rinses and
moves the load. Fabric softener will be added if the Fabric
Softener "On" option was selected.
SPIN
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin
speed.
CYCLE COMPLETE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
6
LID LOCKED
To allow for proper load sensing and
spinning, the lid will lock and the Lid
Locked light will turn on. This light
indicates that the lid is locked and
cannot be opened.
If you need to open the lid, press
START/Pause/Unlock Lid. The lid will
unlock once the washer movement
has stopped. This may take several
minutes if the load was spinning at
high speed. Press START/Pause/Unlock
Lidagain to resume the cycle. Avoid
opening the lid during sensing. The sensing process
will start over when the washer is restarted.