Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Specifications
Maximum Output
:
2
(calculated)
Power Rating
:
3
rms (IEC 100 hrs):
EN
recommended amp power:
Sensitivity:
Directivity Index:
Q:
Weight:
Nominal Coverage:
Enclosure and Grill:
Connectors:
Mounting Hardware:
NOTES:
1- All frequency ranges specified refer to measured free-field response (4 pi).
2- Calculated maximum peak SPL at 1 m, free-field, speaker operating at rated rms power pink noise input, 50 Hz to 20 kHz.
3- Maximum input power tested in accordance with IEC recommendations; 50 Hz to 20 kHz band limiting, 6 dB signal crest factor.
8
:
80- 21k Hz (-6 dB)
1
60- 22k Hz (-10 dB)
113 dB SPL continuous rms output
119 dB SPL peak output
8 ohms nominal
7.0 ohms minimum, 210 Hz
135 ohms maximum
200 watts rms
400 watts rms
90.5 dB, 1 watt, 1 meter, free field (4 pi)
1000 Hz
2000 Hz
16000 Hz
8000 Hz
16000 Hz
I-82H: 17.5 lb. net, 20.5 lb. shipping
I-YM8: 2.8 lb. net, 5.0 lb. shipping
90° horiz. x 60° vert., waveguide can be rotated 90°
high impact polystyrene, removable metal grill, logo badge can be rotated
two (2) Neutrik Speakon NL4FC connectors wired in parallel, +signal: pin 1+, - signal: pin 1-
Included: Pole cup (attaches to loudspeaker bottom or optional yoke mount,
fits 1.375" or 1.500" (35 mm or 38 mm) diameter poles) and 5/8"-27 mic stand adapter.
Optional: Yoke mount with retaining knobs, two swivel feet for using yoke mount as stage
monitor, pole cup (attaches to loudspeaker bottom or optional yoke mount, fits 1.375" or 1.500"
(35 mm or 38 mm) diameter poles) and 5/8"-27 mic stand adapter, and retaining knob for pole cup.
Specifications are subject to change without notice.
4.0
5.5
11.7
8.9
8.6
7.2
2.5
3.6
14.7
7.7
7.3
5.3
Publicité
Table des Matières
